SPC Performance AL SHIMS 4X6.5X1 deg.(6)

SPC Performance AL SHIMS 4X6.5X1 deg.(6)

Marsoni

M251S

$57.30

Get it in 3 business days with 1 day shipping. Friday, May 29

SPC Performance AL SHIMS 4X6.5X1 deg.(6)These economical over the road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect caster on over the road trucks and trailers. NOTE: Or dering one Part Number supplies Six Shims in a box. When pla cing order spring pad length and width are needed. California Residents WARNING

Easy Shipping

Quick Dispatch:

Your SPC Performance AL SHIMS 4X6.5X1 deg.(6) orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your SPC Performance AL SHIMS 4X6.5X1 deg.(6) ships.

Need Help?
Questions about SPC Performance AL SHIMS 4X6.5X1 deg.(6), sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for SPC Performance AL SHIMS 4X6.5X1 deg.(6) in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Fit my 2018 Honda CRV-EX 1.5 Liter Turbo engine perfectly and it is a good quality air filter. Loosen the 4 cover screws and slip it right in place, make note of the small tab on the side of the filter and line it up so the cover goes back down correctly making a tight seal. TIP - when you loosen the screws with a Phillips head screw driver they wont pull out and there is no chance of losing them or falling out. Took about 5 minutes to replace.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on March 22, 2025

Verified Purchase

Zombie

Lowell, US

★★★★★ 5

Perfect fit. Pls read. Tricky cover removal and cover reinstall..

Perfect fit for 2024 CRV Hybrid Touring. But read if you are DIYing. Its easy but not so easy. Saw a couple of DIY YT videos. Removing the cover is a b*t*h. Use 6mm socket instead of a screw driver. Using socket is very important and a safe bet. The screws are deep and will need several turns to fully unscrew. A magnetic socket is recommended. Don't lose the screw and the 2 washers along with it. Removing the cover is tricky but not hard. Remember, no force is needed anytime during. It slides off of the rubber gasket when you lift a bit and pull it to the right. Once released you need to get it up, out and over that narrow space (the tricky part) to reach the filter. Replace the filter correctly as it has orientation. Putting the cover back is even trickier because the gap is narrower than the cover. Use your brain not force like a puzzle. Once back into the very narrow gap it slides back on the rubber ring/gasket effortlessly. Just double check the alignment before screwing. Absolutely hand turn the screws a good few turns to make sure you are NOT cross threading them before powering (avoid) it. ONLY HAND TIGHTEN SNUG. NO TORQUE NEEDED. I don't like the placement of this engine air filter chamber. Its far back and in a very tight space. Since this is going to be a frequently changed part it should have been more conveniently placed. Not happy with Honda design on this.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on November 28, 2025

Verified Purchase

Waukegan, US

★★★★★ 5

Fit perfect

Same as what I replaced. Nice filter

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on November 25, 2025